Honda Civic Gauge Pod Driver Vent 06-11

Description

Honda Civic Gauge Pod Driver Vent 06-11
This 3D printed part goes in the driver dash vent. Designed to fit a 52mm or 2 1/16 gauge. This replaces the front fins of the vent and still allows control of air flow. This will work on any eighth generation civic 06-11. It will not work on any other generation. Installation is simple. You remove the cluster trim, remove the vent and take apart the front of the vent and replace it with this. No cutting or modifications are required.
This listing is only for the 3D printed part. It doesn't come with the gauge or any interior trim.
I designed this with a 52.5mm hole for the gauge. Not all gauges are 52mm be sure to test fit your gauge
DO NOT JUST PRESS IT IN
. If you feel heavy resistance inserting the gauge, the design will need sanding or you have a gauge larger than 52mm. My gauge pod designs are meant to fit snug so you don't have any rattles or noises. Inexpensive gauges are either larger or smaller than 52mm. If your gauge is too loose add a layer of tape until it fits.
Made out of ABS plastic the same material most automotive interior plastic is made of. This is a raw 3D printed part you will see small lines from being made. The part can be sanded and painted and you won't see any lines.
If you have any questions just ask!