SHARS CAT40 1/2" KEYLESS DRILL CHUCK CAT 40 For Haas Mazak NEW P[

Description

1/2" KEYLESS DRILL CHUCK + CAT 40 JACOB TAPER ADAPTER For
Haas Mazak Machine with CAT40 taper spindle
--THIS UNIT DOES NOT CLOSE DOWN TO ZERO--
-- PLEASE REVIEW CAPACITY BEFORE PURCHASE--
Product Code
202-5015+202-1255
Description:
Keyless Drill Chuck
Drill Chuck's Capacity: 1/32 - 1/2"
Drill Chuck Runout TIR:
0.0048"
Self-tightening & easy to operate
Surfaces on all major components are precisely ground and lapped
All parts except jaw guides and collar are hardened
We also have 3/8", 1/2" and 5/8" drill chuck in stock
A drill chuck wrench MUST be used to tighten the drill chuck to give it enough torque. Tightening by hand would cause damage internally due to insufficient torque and would void the manufacturer warranty. Shars Tool is not responsible for any damage caused by drill bit slipping out of the drill chuck.
Drill chuck wrench is NOT included with all models of the drill chuck sold by Shars Tool, please check online for details.
CAT 40 Drill Chuck Adapter
Draw Bar Thread: 5/8"-11
Hardened to RC 52-56 and ground to ensure maxium accuracy
Jacobs Taper Runout T.I.R
< 0.0002"
Taper accuracy ground meets AT3 specifications
Made of alloy forged steel for long, durable service life
Gage Length: 1-1/2"
We also have 2JT fits 3/8 & 1/2" Drill Chuck, 33JT fits 3/8" Drill Chuck and 6JT fits 1/2" & 5/8 " Drill Chuck
We Also Have Other Products in My Ebay Store:
Product Code:
202-5092A
1/2" Keyless drill chuck with Morse Taper 3 Integral Shank 13mm .002"
Product Code:
202-5091A
1/2" Keyless drill chuck with Morse Taper 2 Integral Shank 13mm .002"
Product Code:
202-1264A
5/8" Integrated Precision Ball Bearing Keyless Drill Chuck .002"
Product Code:
202-5017A
1/2" Keyless drill chuck w/R8 Integral Shank 13mm .002"
Product Code:
202-5090A
1/2" Keyless drill chuck w NMTB40 Integral Shank 16mm .002"
SHARS 6" 670V Milling Vise +/-0.0004
6" wide jaw plate, 8.95" inner jaw opening, 17" outer jaw opening
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 2.875" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more,
click here to 202-0993
SHARS 6" 660U Milling Vise +/-0.0004
6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw opening
Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 3.189" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more,
click here to 202-0995
SHARS 6" 600DS Double Station Milling Vise +/-0.0002
6" wide jaw plate
4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)
Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
Jaw lift prevention mechanism by eccentric pin design
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 3.25" +/-0.0005"  (matched bed height at no additional cost)
Clamping repeatability +/-0.0002"
Lifetime limited warranty
To learn more,
click here to 202-0999
We also carry retention knob for Haas, Fadal, Mazak, Hurco and other popular machine in our Ebay store.
Retention Knob
Made from alloy steel 5155 with heat treat to RC 56-58
Each retention knob is individually magnetic particle tested to ensure free of crack
High quality black oxide finish to ensure long enduring tool life
Fully ground on all critical surface including a pilot (dia. 0.636") under the flange of retention knob for full contact between tool holder's taper end and retention knob
Tolerance exceeds industry standards
Non-coolant through
stock # 202-5925
Also available is a CAT40 CNC Tool Tightening Fixture
All Available to Ship NOW! at Fixed Prices
If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone:1-630-443-3244
Email:
[email protected]
SHIPPING: UPS Ground
Buyer pays
ACTUAL UPS shipping & insurance, and a .00 handling fee
for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
PAYMENT:
We accept
VISA, MasterCard and E-Check on PayPal.com
Illinois resident adds 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.
Any questions regarding our tools, feel free to email us at
our eBay Message Box
.